規格表
| Shape | Spec. | Machining Materials | L | L1 | d | r | s | a | Drawing |
|---|---|---|---|---|---|---|---|---|---|
| TBGW060102SN CB10H |
| 6.5 | 2 | 3.97 | 0.2 | 1.59 | 5 | |
| TBGW060102SN CB30H | | 6.5 | 2 | 3.97 | 0.2 | 1.59 | 5 | ||
| TBGW060102SN CB10K | | 6.5 | 2 | 3.97 | 0.2 | 1.59 | 5 | ||
| TBGW060104SN CB10H |
| 6.12 | 1.76 | 3.97 | 0.4 | 1.59 | 5 | ||
| TBGW060104SN CB30H |
| 6.12 | 1.76 | 3.97 | 0.4 | 1.59 | 5 | ||
| TBGW060104SN CB10K |
| 6.12 | 1.76 | 3.97 | 0.4 | 1.59 | 5 |
• Unit of Length (mm)
| ISO分類 | 切削狀態 Cutting Condition : | |||
|---|---|---|---|---|
| ● 連續切削 Continuous Cutting | ○ 一般切削 General Cutting | ■ 斷續切削 Interrupted Cutting | ||
| P | 合金鋼 Alloyed Steels | | | |
| M | 不鏽鋼 Stainless Steels | | | |
| K | 鑄鐵 Cast Iron | | | |
| N | 鋁及鋁合金 Aluminum&Al | | | |
| S | 高溫合金 Refractory Alloys | | | |
| H | 高硬度材 Hard Material | | | |